---
title: "Bass Tuner Online: 4-String & 5-String Bass Guitar"
description: "Free online bass tuner with microphone: tune a 4-string, 5-string or 6-string bass guitar from the low B up, in standard or drop D, with reference tones."
url: "https://theaudiostuff.com/tools/online-tuner/bass/"
type: "website"
author: "Jakub Charkiewicz"
---

> Markdown rendering of https://theaudiostuff.com/tools/online-tuner/bass/
> Canonical URL to cite: https://theaudiostuff.com/tools/online-tuner/bass/
> Generated from the published page. Text and links only; see the HTML for layout.

Breadcrumb: [Home](https://theaudiostuff.com/) > [Tools](https://theaudiostuff.com/tools/) > [Online Tuner](https://theaudiostuff.com/tools/online-tuner/) > Bass Tuner

# Online Bass Tuner

Tune a bass guitar with a free online bass tuner that listens through the microphone in your phone, tablet or laptop. It reads down to the low B of a five-string at 30.87 Hz, names the string you played and says whether to tune it up or down. The page opens on the four-string in standard tuning, E A D G; the five-string, the six-string and drop D are in the list, and every string has a reference tone built to be heard on a small speaker.

**Before you start:** play one string at a time, let it ring and mute the others. A low note takes a moment longer to read than a high one, so give it a second before you turn the peg.

Press Start and allow the microphone when your browser asks.

## Tune your instrument {#otn-tune-h}

Each button plays its note for four seconds, rich in harmonics so a phone speaker that cannot reach a bass string's fundamental still sounds its pitch. The tuner pauses while it plays; press it again or Esc to stop.

- **You should see**: The note you played, its octave and how many cents it is off, a moment after you pluck. With an instrument chosen, the string you played lights up and the line under the strip says which way to turn: flat means tune up, sharp means tune down. Within 3 cents either side the reading turns green and says In tune.
- **If it looks wrong**: Nothing shows: check the microphone in the list, its level in your system's sound settings, and play louder or closer. Talking, noise and two strings at once show nothing on purpose. The reading jumps: mute the other strings with your hand, and read after the first instant of the note, which is a little sharp on a hard pluck. It names the wrong string: a string tuned far off its note can sit nearer the next one. Choose Chromatic, bring it close by note name, then switch back.

## How to tune a bass guitar {#otn-how-h}

- **Know the notes**: A four-string bass is tuned E, A, D, G from the thickest string to the thinnest, the same notes as the four lowest strings of a guitar and one octave below them. A five-string adds a low B under the E, and a six-string adds a high C above the G as well.
- **Give the microphone a clear note**: Pluck the open string firmly near the neck with a finger and let it ring. Plucking hard close to the bridge makes the note start sharp and settle, which the tuner follows.
- **Bring the device close**: An unplugged bass is quiet. Hold the phone or laptop near the strings, or play through the amplifier at a low volume with the tone controls flat.
- **Turn toward the note**: Flat means tighten, sharp means loosen. Bass pegs turn a long way for a small change in pitch, so make small moves and pluck again each time.
- **Use the harmonic for a hard string**: If a low string will not read, touch it lightly over the twelfth fret and pluck: the harmonic sounds one octave higher and rings clearly. Switch the Instrument list to Chromatic for this, since the harmonic is the string's note in a higher octave.
- **Go round again**: Check every string a second time once all are near, because each one you tighten pulls the others slightly flat.

How the tuner finds a note, what cents are and how to read the strip are explained on the main [online tuner](https://theaudiostuff.com/tools/online-tuner/) page, which also has a chromatic setting for any instrument. Other instruments: [guitar tuner](https://theaudiostuff.com/tools/online-tuner/guitar/), [ukulele tuner](https://theaudiostuff.com/tools/online-tuner/ukulele/) and [violin tuner](https://theaudiostuff.com/tools/online-tuner/violin/).

## Bass tunings and their string frequencies {#ref-otn-title}

Each tuning from the thickest string to the thinnest, with every string's equal-tempered frequency at A4 = 440 Hz. All of them are in the tuner's Instrument list.

| Tuning | Strings, from the thickest to the thinnest |   |   |   |   |   |
| --- | --- | --- | --- | --- | --- | --- |
| Bass, 4-string |   | E1 41.20 Hz | A1 55.00 Hz | D2 73.42 Hz | G2 98.00 Hz |   |
| Bass, 5-string | B0 30.87 Hz | E1 41.20 Hz | A1 55.00 Hz | D2 73.42 Hz | G2 98.00 Hz |   |
| Bass, 6-string | B0 30.87 Hz | E1 41.20 Hz | A1 55.00 Hz | D2 73.42 Hz | G2 98.00 Hz | C3 130.81 Hz |
| Bass, drop D |   | D1 36.71 Hz | A1 55.00 Hz | D2 73.42 Hz | G2 98.00 Hz |   |

### Where the notes and frequencies come from {#otn-sources-h}

- [ISO 16: Standard tuning frequency (Standard musical pitch)](https://www.iso.org/standard/3601.html)
  Standard International Organization for Standardization Paid full text
  The standard tuning frequency, 440 Hz for the A above middle C, which every string frequency on this page is counted from.
- [UNSW: Note names, MIDI numbers and frequencies](https://newt.phys.unsw.edu.au/jw/notes.html)
  Reference UNSW Sydney
  Note names and their equal-tempered frequencies at A4 = 440 Hz, the arithmetic behind the tunings table.

## Bass tuner FAQ {#otn-faq-title}

1. ### What notes are bass guitar strings tuned to? {#otn-faq-what-notes-are-bass-guitar-strings-tuned-to}
   A four-string bass in standard tuning is E, A, D, G from the thickest string to the thinnest, at 41.20, 55.00, 73.42 and 98.00 Hz with A4 at 440 Hz. A five-string adds a low B at 30.87 Hz, and a six-string adds a high C at 130.81 Hz above the G.
2. ### Can a phone microphone hear a bass string? {#otn-faq-can-a-phone-microphone-hear-a-bass-string}
   Yes, in most cases. A phone microphone picks up little of a bass string's lowest frequency, but a plucked string also sounds at two, three and four times that frequency, and all of those repeat at the rate of the note. The tuner measures that repeating rate, so it reads the right note from the overtones. If a low B or E still will not read, play the twelfth-fret harmonic with the Instrument list on Chromatic.
3. ### How do I tune a 5-string bass? {#otn-faq-how-do-i-tune-a-5-string-bass}
   Choose Bass, 5-string in the Instrument list. The strings are B, E, A, D, G from the thickest to the thinnest, so the extra string is the low B and the other four are the same as on a four-string. Start with the B, pluck it gently and wait a second for the reading, since so low a note takes longer to measure.
4. ### How do I tune a bass to drop D? {#otn-faq-how-do-i-tune-a-bass-to-drop}
   Choose Bass, drop D in the Instrument list and lower the thickest string from E to D, a whole step. The A, D and G strings stay where they are. The lowered string should sound exactly one octave below the open D string.
5. ### Can I use a guitar tuner for a bass? {#otn-faq-can-i-use-a-guitar-tuner-for-a}
   A tuner that names notes works for both, because a bass uses the same note names as the four lowest guitar strings, one octave down. A tuner set to guitar strings can pick the wrong string for a bass note, so use the bass setting here, which looks for the bass's own strings and reads low enough for a five-string.

## You might also use these tools {#rt-title}

- Test **Is my microphone working, and is it set up right?** [Mic Test](https://theaudiostuff.com/tools/mic-test/) Watch your microphone's level as you speak, then run a ten-second check for the noise floor, clipping, mains hum and how high its sound reaches, and play back what it recorded.
- Meter **How loud is it here?** [Decibel Meter](https://theaudiostuff.com/tools/decibel-meter/) Measure the sound level around you in dB(A) with your phone or laptop microphone: Fast or Slow, the average, the maximum, octave bands and how long NIOSH allows at that level.
- Analyzer **Which frequencies are in this sound?** [Spectrum Analyzer](https://theaudiostuff.com/tools/spectrum-analyzer/) See any sound around you live through your microphone: an FFT spectrum, one-third-octave or octave bands like an RTA, or a scrolling spectrogram, with the loudest frequency and its note, averaging, peak hold and CSV export. It also measures your room: reverb time and the bass at your seat.
